Pure wool fabrics are naturally soft in color and good in keeping warm, and are the first choice for making high-end suits and coats. There are more and more wool-like fabrics, and with the improvement of textile technology, they have reached a level that is difficult for most customers to identify, but the color, warmth, and hand feel are far less than pure wool fabrics. Below,
1. Hand feel. Pure wool fabrics usually feel smooth to the touch, while long-haired fabrics are smooth to the touch along the fur, and tingling against the fur. As for the blended or purified fibers, some are not soft, some are too soft and loose, and have a sticky feeling.
2. Look at the color. The color of pure wool fabrics is naturally soft, bright and not out of date. In contrast, blended or purified fiber fabrics are either duller or shimmering.
3. Look at elasticity. Tighten the thing with your hand, and then release it immediately to see the elasticity of the fabric. Pure wool fabrics have a high rebound rate and can quickly return to their original state, while blended or chemical fiber products have poor wrinkle resistance, and most of them have obvious wrinkles or slow recovery.
4. Identification by combustion method. Take a bunch of yarn and burn it with fire. The smell of pure wool fiber is like burning hair, and the smell of chemical fiber fabric is like burning plastic. The harder the particles after combustion, the more chemical fiber components.
5. Single root identification. The hair of all animals is scaly under the microscope. If it is a long-haired fabric, just take a woolen wool and rub it a few times and it will move up or down (in order to master this skill, you can first take a hair and do test), if it is an ordinary fabric, take a piece of yarn, cut two 2 cm pieces and split them into fibers, put them in the palm of your hand and rub them for four or five times Will they move.
Through the above introduction,
You must be registered for see links
introduces 5 ways to identify pure wool fabrics.1. Hand feel. Pure wool fabrics usually feel smooth to the touch, while long-haired fabrics are smooth to the touch along the fur, and tingling against the fur. As for the blended or purified fibers, some are not soft, some are too soft and loose, and have a sticky feeling.
2. Look at the color. The color of pure wool fabrics is naturally soft, bright and not out of date. In contrast, blended or purified fiber fabrics are either duller or shimmering.
3. Look at elasticity. Tighten the thing with your hand, and then release it immediately to see the elasticity of the fabric. Pure wool fabrics have a high rebound rate and can quickly return to their original state, while blended or chemical fiber products have poor wrinkle resistance, and most of them have obvious wrinkles or slow recovery.
4. Identification by combustion method. Take a bunch of yarn and burn it with fire. The smell of pure wool fiber is like burning hair, and the smell of chemical fiber fabric is like burning plastic. The harder the particles after combustion, the more chemical fiber components.
5. Single root identification. The hair of all animals is scaly under the microscope. If it is a long-haired fabric, just take a woolen wool and rub it a few times and it will move up or down (in order to master this skill, you can first take a hair and do test), if it is an ordinary fabric, take a piece of yarn, cut two 2 cm pieces and split them into fibers, put them in the palm of your hand and rub them for four or five times Will they move.
Through the above introduction,
You must be registered for see links
hopes that you can simply refer to the content of this article in future use.